Programming matter

work team: Tommaso Casucci, Michele Semeghini

This is a series of studies developed during a recent collaboration with Co-de-iT and is a step forward in a larger research project focused on the exploration of the possible interactions between digital computation and complex and selforganizing physical processes.
The series is  developed on the base of a small bit of code refined during the ‘BioLogic:living structures and swarm bodies’ workshop, aimed to facilitate direct communication from Processing to FDM 3Dprinters through the generation of G-code instructions. Code is available here
The studies main goal were to explore the combined use of generative design strategies and material computation, in particular the capacity of plastic threads to self-organize in curly geometries once extruded from the printer.

Design exploration consisted at first in calibration and mapping of the different material behavoiurs based on the variation of different extruding conditions. Parameters we found to affect the most the extrusion were:
. extrusion length
. extrusion velocity
. nozzle height from the deposition plate
. material
. nozzle size

Once a comprehensive catalogue have been refined, a series of design studies was developed were on one or more of the parameters above was varied according to modulate structural, aesthetical or performative qualities during the extrusion.

A short selection of 3Dprinted samples and screenshots from the Processing application below :

Licenza Creative Commons
This opera is licensed under a Creative Commons Attribuzione 3.0 Unported License.